Functions and Features
Includes card remote on projector
In addition to normal use on the projector, the controller can be detached from the projector for use as a remote to control all functions of the projector for added convenience.
Top of this page
Automatic signal selection
When turning on the power, input signals are automatically detected and images are projected. Furthermore, if the Source Lock function is OFF, automatically detected input signals for projected images are discontinued.
Keystone correction function corrects trapezoidal distortions
Trapezoidal distortions on projected images are corrected up to +/-40 degrees of the projection angle vertically. Keystoning can be operated from the "K-STONE" button, for easy adjustments.
Multiple input/output terminals
The input terminals include Video, S-video, and Computer. Since the projector has a monitor output terminal, the same projected images can be displayed on the display in front of you to confirm that the desktop PC is connected to the projector.
ECO mode extends lamp life
To extend the life of the lamp, select the ECO mode to reduce the brightness. This function will reduce the total cost of ownership by reducing lamp replacement intervals.
* When the lamp mode is set to the ECO mode, the brightness is reduced to about 80% of normal mode.
Fan Control mode for use in low atmospheric pressures
Once the Fan Control is ON, the fan turns at high speed constantly. Thus, the projector can be cooled normally even when the atmospheric pressures are low, and the projector can be used in higher elevations.
More vivid colours
With BrilliantColor and the resulting superior reproducibility of neutral colours, images of natural scenery are more vivid.
Terminal Panel
Throwing Distance and Screen Size
Screen Size
(Inch) |
Throwing Distance (m) |
Bottom
Height (cm) |
| Wide |
Tele |
| 30 |
- |
1.31 |
6.9 |
| 40 |
1.59 |
1.75 |
9.1 |
| 60 |
2.38 |
2.62 |
13.7 |
| 80 |
3.17 |
3.50 |
18.3 |
| 100 |
3.96 |
4.37 |
22.9 |
| 120 |
4.76 |
5.24 |
27.4 |
| 150 |
5.94 |
6.55 |
34.3 |
| 180 |
7.13 |
7.86 |
41.1 |
| 200 |
7.93 |
8.74 |
45.7 |
| 240 |
9.51 |
10.49 |
54.9 |
| 300 |
11.89 |
- |
68.6 |
The values in the tables are design values and may vary.
Specifications
| Model Name |
NP200 |
NP100 |
| DLP Chip *1 (Aspect Ratio 4:3) |
0.55-inch 1 chip DLP,
1,024 x 768 pixels |
0.55-inch 1 chip DLP,
800 x 600 pixels |
| Lens |
Manual Zoom / Focus |
Throw ratio 1.95-2.15:1, F2.41-2.55, f=21.83-24 mm |
| Projection Distance |
1.2 m to 12.0 m |
| Lamp (Eco Mode) |
180 W (150 W) AC |
| Lamp Life *2 (Eco Mode) |
3,500 H (4,000 H) |
| Light Output *3 |
2,100 ANSI lumens
(Approx. 80% in ECO mode) |
2,000 ANSI lumens
(Approx. 80% in ECO mode) |
| Colour Wheel |
5 - segment |
6 - segment |
| Contrast Ratio (White/Black) *3 |
1,300 : 1 |
1,200 : 1 |
| Quietness (Eco Mode) |
36 dB (33 dB) |
| Image Size (Diagonal) |
27.5 inch to 302.8 inches (0.69 m to 7.69 m) |
| Maximum Resolution |
SXGA+ 1,400 x 1,050 |
SXGA 1,280 x 1,024 |
| Frequency |
Horizontal |
31.35 kHz to 80 kHz |
31.35 kHz to 68.7 kHz |
| Vertical |
56 Hz to 85 Hz |
| Colour Reproduction |
Full Colour, 16.7 Million Colours Simultaneously |
| Input Terminals |
Computer Input |
D-Sub Mini 15pin |
RGB |
0.7 Vp-p / 75 Ω |
| H/V Sync |
4.0 Vp-p / TTL Level |
| Stereo Mini jack |
Stereo L / R |
0.5 Vrms |
| Component Input |
D-Sub Mini 15pin
(Sharing With
Computer) |
Y |
1.0Vp-p/75Ω (With Sync) |
Cb ・ Cr
(Pb ・ Pr) |
0.7Vp-p / 75Ω |
| Compatible signals |
480p, 480i, 576p, 576i, 720p, 1080i |
| Audio input is sharing with computer |
Same with computer |
| Video Input |
RCA pin |
Composite Video |
NTSC-M/NTSC-4.43/PAL-M/
PAL-B, D, G, H, I/PAL-N/SECAM |
| 1.0 Vp-p / 75 Ω |
| Audio input is sharing with computer |
Same with computer |
| S-Video Input |
Mini DIN-4pin |
Y |
1.0Vp-p / 75Ω |
| C |
0.286Vp-p / 75Ω |
| Audio input is sharing with computer |
Same with computer |
| Output Terminals |
Monitor Output |
D-Sub Mini 15 pin |
Only computer signal can be output |
| Control Terminals |
For service |
Mini DIN - 3 pin |
Only for service use |
| Built-In Speaker |
2 W Monaural |
| Keystone Correction |
Vertical |
Manual Approx. ±Max 40 degrees |
| Environment *4 |
Operational Temperatures |
5°C to 35°C, Max 80% Humidity
(Non-Condensing) |
| Storage Temperatures |
-20°C to 60°C, Max 80% Humidity
(Non-Condensing) |
| Power Requirement |
100 to 240V AC, 50Hz/60Hz |
| Input Current |
2.5 - 1.0 A |
| Power Consumptionl |
Normal Mode
(ECO mode / Standby mode) |
228 W (190 W / 7 W) |
| Regulations |
For United States / Canada |
UL60950-1/CSA60950-1, CFR 47 Part15
(Line Radiation: CISPR 22), ICES-003 |
| For Asia / Oceania |
AS/NZS CISPR 22:2006 |
| For Europe |
2006/95/EC, EN60950-1/IEC60950-1,
2004/108/EC, EN55022:2006,
EN55024:1998+A1:2001+A2:2003,
EN61000-3-2:2000+A2:2005,
EN61000-3-3:1995+A1:2001+A2:2005 |
| Dimensions (W x D x H) |
272 mm x 199 mm x 80 mm
(Not including protrusions) |
| Net Weight |
2.3 kg |
Dimensions
Accessories
Options
Replacement lamp
NP10LP
Ceiling mount kit
NP09CM
