| Wireless-G Access Point |
| Specifications |
| Model Number |
WAP200 |
| Standards |
IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority), 802.1q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming) |
| Ports |
10/100 Base-T Ethernet, 12 VDC Power |
| Buttons |
Reset |
| Cabling Type |
UTP CAT 5 |
| LEDs |
Power, POE, Wireless, Ethernet |
| Operating System |
Linux |
| Setup/Config |
| WebUI |
Built in Web UI for Easy browser-based configuration (HTTP/HTTPS) |
| Management |
| SNMP Version |
SNMP Version 1, 2c, 3 |
| Event Logging |
E-mail Notification
Remote Syslog |
| Web F/W upgrade |
Firmware Upgradable Through Web-Browser |
| Diags: Flash, etc. |
Diags: Flash, RAM, LAN, WLAN |
| DHCP |
DHCP Client |
| Operating Modes |
| Access Point |
Access Point Mode, point-to-point Bridge Mode, point-to-multipoint Bridge Mode, Repeater Mode |
| Wireless |
| Spec/Modulation |
Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM |
| Channels |
Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan) |
| # of External Ant. |
2 (Omni-Directional) SMA detachable |
| Transmit Power |
Transmit Power (Adjustable) @ Normal Temp Range: 11b - 18 dBm; 11g - 14 dBm |
| Antenna Gain in dBi |
2 |
| Receiver Sensitivity |
11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBM |
| Security |
| WEP/WPA/WPA2 |
WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT |
| Access Control |
Wireless Connection Control: MAC-Based |
| SSID Broadcast |
SSID Broadcast Enable/Disable |
| 802.1X |
IEEE 802.1X support |
| Wireless Client Isolation |
Wireless Client devices can be isolated from each other either within an SSID or between two SSIDs |
| Wireless Security Monitor |
Scan and Classify wireless devices in the network. Report new client and AP joining network and suspicious network events (Works together with 200 Business series client adapters):
1. Intrusion Alarms (e.g., Rogue Client Detected, Spoofed MAC address)
2. Denial of Service Alarms (e.g., Duration Attack, Association Table Full)
3. Vulnerability Alarms (e.g., AP is not using encryption, AP is broadcasting SSID)
4. Other Alarms (e.g., Low speed connection)
|
| Quality of Service |
| QoS |
4 Queues WMM Wireless priority |
| General |
Wireless roaming based on IAPP Load Balancing Auto-channel selection |
| Environmental |
| Dimensions |
6.69" x 8.07" x 7.68" |
| WxHxD |
170 x 205 x 195 mm |
| Unit Weight |
0.88 lb (0.4 kg) |
| Power |
12V 1A DC input, and IEEE 802.3af Compliant PoE |
| Certification |
FCC, ICES-003, CE |
| Operating Temperature |
32 to 104ºF (0 to 40ºC) |
| Storage Temperature |
-4 to 158ºF (20 to 70ºC) |
| Operating Humidity |
10 to 85% noncondensing |
| Storage Humidity |
5 to 90% noncondensing |
